現代車庫門款式有很多，遙控、電動、手動等等，業主在選購的時候，不僅要選擇車庫門材質，車庫門尺寸也是不能忽略的。車庫門尺寸一般多大合適？裝一網為您解答。

　　There are many styles of modern garage doors, such as remote control, electric, manual, etc. When choosing, homeowners not only need to choose the material of the garage door, but also the size of the garage door cannot be ignored. What is the appropriate size for a garage door? Install a website to answer your questions.

　　車庫門分類

　　Garage door classification

　　經過多年的發展后，車庫門形成幾個種類： 普通彩鋼板車庫門、實木車庫門、銅質車庫門等。

　　After years of development, several types of garage doors have emerged: ordinary color steel plate garage doors, solid wood garage doors, copper garage doors, etc.

　　一、電動(銅質)車庫門

　　1、 Electric (copper) garage door

　　鋁合金實木結構的車庫門，由于木材的特性受氣候濕度等環境影響，開裂是不可避免。雖然可以通過烘干、油漆等工藝減小開裂，但不能做到完全避免。

　　The garage door with aluminum alloy solid wood structure is inevitably cracked due to the characteristics of the wood being affected by climate, humidity and other environmental factors. Although cracking can be reduced through processes such as drying and painting, it cannot be completely avoided.

　　而銅質車庫門，采用外包銅皮和內充聚氨酯的結構，這兩種材料都非常穩定，不會出現變形的情況，因此維護保養非常方便。有的用銅皮取代門板聚氨酯發泡門板兩面的彩鋼板，外觀古樸，適用于高檔別墅的車庫門。

　　The copper garage door adopts a structure of external copper skin and internal polyurethane filling, both of which are very stable and will not deform, making maintenance very convenient. Some use copper skin instead of polyurethane foam door panels and color steel plates on both sides of the door panels, which have a simple and noble appearance and are suitable for garage doors in high-end villas.

　　二、實木車庫門

　　2、 Solid wood garage door

　　實木車庫門：實木車庫門(又稱鋼木車庫門)結構采用2.0毫米鋼架結構，輸入防夾手設計元素，每一塊門板采用上下兩條鋼板，用冷軋設備加工成防夾手形狀，開槽后的實木門板嵌入鋼架內，豎檔和防夾手鋼結構之間采用點焊設備連接，焊點平整牢固。

　　Solid wood garage door: The structure of the solid wood garage door (also known as the steel wood garage door) adopts a 2.0mm steel frame structure, with anti pinch design elements input. Each door panel is made of two upper and lower steel plates, processed into an anti pinch shape by cold rolling equipment. The slotted solid wood door panel is embedded in the steel frame, and the vertical bracket and anti pinch steel structure are connected by spot welding equipment, with smooth and firm welding points.

　　三、遙控車庫門

　　3、 Remote control garage door

　　1、微電腦程序控制，使用方便，按遙控手柄即可，且電機自帶自動延時照明燈。

　　1. Microcomputer program control, easy to use, just press the remote control handle, and the motor comes with automatic delay lighting.

　　2、超級靜音，綠色。

　　2. Super silent, environmentally friendly.

　　3、停電有應急鎖，開關容易。

　　3. There is an emergency lock for power outages, and it is easy to switch on and off.

　　4、、牢固，雙層彩鋼板，門板總厚度4-5公分，門體中間采用國際公認的保溫隔熱隔音材料——聚氨酯。

　　4. Safe and sturdy, double-layer color steel plate, with a total thickness of 4-5 cm for the door panel. The middle of the door body is made of internationally recognized thermal insulation and sound insulation material - polyurethane.

　　5、美觀、高雅，簡潔大方。

　　5. Beautiful, elegant, simple and generous.

　　6、遇阻反彈，保證人車。

　　6. Rebound when encountering obstacles, ensuring the safety of people and vehicles.

　　7、原理科學，門內置扭簧，扭力和門重量相當，使門體處于“零重量”狀態，且在軌道內靠滑輪運行，故阻力小，耗能少，維修率低，經久耐用。

　　7. The principle is scientific. The door is equipped with a built-in torsion spring, which has a torque equivalent to the weight of the door, keeping the door in a "zero weight" state. It also operates on a pulley within the track, resulting in low resistance, low energy consumption, low maintenance rate, and durability.

　　8、零部件拆卸及更新方便，有利于維護。

　　8. The disassembly and updating of components are convenient and conducive to maintenance.

　　9、保溫性、抗風性、密封性較好。

　　9. Good insulation, wind resistance, and sealing performance.

　　車庫門尺寸一般多大合適?

　　What is the appropriate size for a garage door?

　　一般情況下住戶自備車為小型車輛，其中以轎車占大多數。所以家庭車庫門尺寸應以中型轎車4.9m長X1.8m寬x1.8m高為設計標準車型尺寸，據此的停車位尺寸應為(5—6)m長x(2.5—3)m寬，車庫車道的寬度及轉彎半徑也應據此數據進行設計。

　　Generally, residents bring their own small vehicles, with sedans accounting for the majority. Therefore, the size of the home garage door should be based on the design standard size of a medium-sized sedan, which is 4.9m in length, 1.8m in width, and 1.8m in height. The corresponding parking space size should be (5-6) m in length, and (2.5-3) m in width. The width and turning radius of the garage lane should also be designed based on this data.

　　一般車庫設計尺寸規劃停車位尺寸的時候，可以參考以下尺寸標準：

　　When designing and planning the size of parking spaces in a general garage, the following size standards can be referred to:

　　1、大車停車位

　　1. Large car parking space

　　大車停車位寬4米，長度7米到10米，視車型定。

　　The parking space for large vehicles is 4 meters wide and 7 to 10 meters long, depending on the vehicle model.

　　2、小車停車位

　　2. Car parking space

　　小車停車車位，寬度2.2米到2.5米，長度5米。

　　Car parking space, with a width of 2.2 meters to 2.5 meters and a length of 5 meters.

　　3、旁邊道路小車

　　3. Small car on the nearby road

　　單面停車5米寬，雙面6米，大車8米。

　　Single sided parking with a width of 5 meters, double-sided parking with a width of 6 meters, and large vehicles with a width of 8 meters.

　　車庫門選購知識

　　Garage door selection knowledge

　　1、選擇好的別墅車庫門應該具備，手指保護功能、良好密封性能、遇阻反彈功能、手動開啟功能、防撬、報警功能等。

　　1. A good choice of villa garage door should have finger protection function, good sealing performance, rebound function in case of obstruction, manual opening function, anti pry, alarm function, etc.

　　2、選準門框

　　2. Select the right door frame

　　它的作用主要是調節車庫土建的誤差，將車庫調整到完全的橫平豎直，這樣可以減少別墅車庫門在使用過程中與導軌的摩擦，從而達到降低噪音，延長別墅車庫門使用壽命的作用，可以起到密封防止風沙及保溫的作用。

　　Its main function is to adjust the errors in the garage construction, making the garage completely horizontal and vertical. This can reduce the friction between the villa garage door and the guide rail during use, thereby reducing noise and extending the service life of the villa garage door. It can also serve as a seal to prevent sandstorms and provide insulation.

　　3、手指保護功能

　　3. Finger protection function

　　它是一個重要的功能，即在別墅車庫門門板和門板結合處做手指保護處理。提供這種手指保護裝置可以確保您和家人的，是非常有必要注意的。

　　It is an important function that provides finger protection at the junction of the villa garage door panel and the door panel. Providing this finger protection device can ensure the safety of you and your family, and it is very necessary to pay attention to it.

　　4、遇阻回升的功能

　　4. The function of rebounding when encountering obstacles

　　就是別墅車庫門在運行過程中遇到阻礙會停止運行并釋放阻礙物，可以有效保障人車。例如，門處在關閉過程中，而你的愛車或愛子仍在門下停留，這時門在運行過程中遇到5公斤阻力時會自動回升，保證您的愛車和愛子的。

　　The villa garage door will stop running and release obstacles when encountering obstacles during operation, which can effectively ensure the safety of people and vehicles. For example, if the door is in the process of closing and your car or beloved child is still parked under the door, the door will automatically rebound when encountering a resistance of 5 kilograms during operation, ensuring the safety of your car and beloved child.

　　5、配件

　　5. Accessories

　　是需要防銹處理，別墅車庫門的重量大部分靠扭簧;軌道的厚度與寬度也是決定一個門體穩定性能的關鍵部分。

　　Firstly, rust prevention treatment is required, as most of the weight of villa garage doors relies on torsion springs; The thickness and width of the track are also key factors determining the stability performance of a gate body.

　　6、安裝技術

　　6. Installation Technology

　　由于別墅車庫門沒有統一標準，安裝難度大，要選擇技術好的師傅安裝別墅車庫門，這樣出來的門用一根手指頭可以拉上拉下，而且上升力稍大于下降力，調試運行時，沒有雜音。

　　Due to the lack of a unified standard for villa garage doors and the difficulty of installation, it is necessary to choose a skilled technician to install the villa garage door. This way, the door can be pulled up and down with just one finger, and the upward force is slightly greater than the downward force. During debugging and operation, there is no noise.

　　車庫門安裝步驟

　　Installation steps for garage door

　　一、軌道的安裝

　　1、 Installation of tracks

　　根據門板的寬度和高度確定兩軌道固定性的位置并用水平管測水平，再用M8×41㎜的方頭螺釘固定。用卷尺測準水平軌與墻壁及兩水平軌之間的間距，用水平尺測準水平軌的水平，然后用M6.4×14㎜的小帽螺絲和六角螺帽將水平軌連接件與水平軌和軌道固定性連接固定。用帶眼角鋼制成兩個三角架，然后將其與水平軌的末端用M6.4×14㎜的小帽螺絲、螺帽連接，并用M8×70㎜的膨脹螺栓固定到天棚或墻壁上。

　　Determine the fixed position of the two tracks based on the width and height of the door panel, measure the level with a horizontal tube, and then fix it with M8 × 41mm square head screws. Use a tape measure to measure the distance between the horizontal rail and the wall, as well as between two horizontal rails. Use a level ruler to measure the level of the horizontal rail, and then use M6.4 × 14mm small cap screws and hex nuts to securely connect and fix the horizontal rail connector to the horizontal rail and track. Make two triangular brackets with corner steel, then connect them to the end of the horizontal rail with M6.4 × 14mm small cap screws and nuts, and fix them to the ceiling or wall with M8 × 70mm expansion bolts.

　　二、扭簧的安裝

　　2、 Installation of torsion spring

　　將扭簧中心支架、尼龍膠圈、固定法蘭、與門體重量相匹配的扭簧、鎖緊法蘭、繞線輪、軸承支架按順序(分清左右側)套在鍍鋅鋼管上，并注意各零部件是否安裝正確。用M8×41㎜的方頭螺釘將扭簧中心支架固定到洞口上部中間位置的短木板上，并注意避開鏈盒的安裝位置。

　　Insert the torsion spring center bracket, nylon rubber ring, fixed flange, torsion spring that matches the weight of the door body, locking flange, winding wheel, and bearing bracket in order (distinguish left and right sides) onto the galvanized steel pipe, and pay attention to whether each component is installed correctly. Use M8 × 41mm square head screws to fix the torsion spring center bracket to the short wooden board in the middle of the upper part of the hole, and be careful to avoid the installation position of the chain box.

　　用M8×40㎜的螺栓將扭簧中心支架、尼龍膠圈、固定法蘭和扭簧連接，再將扭簧和鎖緊法蘭連接。然后將軸承支架的下端用M9.5×19㎜的大帽螺絲和螺帽與水平軌連接件連接固定，軸承支架的上端用M8×41㎜的方頭螺釘固定到側木框上。

　　Use M8 × 40mm bolts to connect the torsion spring center bracket, nylon rubber ring, fixing flange, and torsion spring, and then connect the torsion spring to the locking flange. Then connect and fix the lower end of the bearing bracket to the horizontal rail connector with M9.5 × 19mm cap screws and nuts, and fix the upper end of the bearing bracket to the side wooden frame with M8 × 41mm square head screws.

　　三、門板的安裝

　　3、 Installation of door panels

　　將底密封條放到底門板的底部，并用M4×16㎜或M6.4×16㎜的自攻釘將其從背面固定到門板上。將底輪支架放到門板的兩側近底密封條的位置，1#折頁分別放到門板頂部的左中右三個位置上(寬度低于10英尺，中間位置是一個;寬度在10英尺14英尺，中間位置是二個;寬度在15英尺18英尺，中間位置是三個)，并分別用M6.4×16㎜的自攻釘固定。

　　Place the bottom sealing strip at the bottom of the door panel and secure it to the door panel from the back using M4 × 16mm or M6.4 × 16mm self tapping screws. Place the bottom wheel bracket on both sides of the door panel near the bottom sealing strip, and place the 1 # hinge on the top of the door panel at the left, middle, and right positions (one for widths less than 10 feet, two for widths between 10 feet and 14 feet, and three for widths between 15 feet and 18 feet), and fix them with M6.4 × 16mm self tapping screws.

　　然后將滾輪涂上甘油穿入底輪支架和1#折頁中，將此門板放到立好的軌道里并使其水平。將2#折頁、3#折頁、4#折頁、頂輪支架按順序分別固定到各塊門板頂部的左右位置，各塊門板中間位置的連接采用1#折頁。將各塊門板按順序放到已立好的軌道里，用M6.4×16㎜的自攻釘連接各折頁與各門板，使各塊門板組合成一體。

　　Then apply glycerin to the roller and insert it into the bottom wheel bracket and the 1 # fold. Place the door panel on the upright track and make it horizontal. Fix the 2 # folding, 3 # folding, 4 # folding, and top wheel bracket in order to the left and right positions on the top of each door panel, and connect the middle position of each door panel using the 1 # folding. Place each door panel in order onto the already erected track, and use M6.4 × 16mm self tapping screws to connect each fold to each door panel, so that each door panel is combined into one.

　　四、扭簧的上勁

　　4、 The upward force of a torsion spring

　　將鋼絲繩帶環的一端套在底輪支架的鉤軸上。按照規定的上勁表給扭簧上勁，不要超過或低于規定圈數的半圈，別住鋼棍，將鋼絲繩的另一端掛在繞線輪上，繃緊鋼絲繩，鎖住繞線輪，再鎖住鎖緊法蘭，撤下別住的鋼棍。此過程具有極大的危險性，必須注意，既要保護好自己，又要避免傷及他人。

　　Insert one end of the steel wire rope loop onto the hook shaft of the bottom wheel bracket. Apply force to the torsion spring according to the prescribed force gauge, not exceeding or falling below half of the specified number of turns. Secure the steel rod, hang the other end of the wire rope on the winding wheel, tighten the wire rope, lock the winding wheel, then lock the locking flange, and remove the secured steel rod. This process is highly dangerous and requires attention to safety. It is necessary to protect oneself while avoiding harming others.

　　五、調整

　　5、 Adjustment

　　用手將門升降數次，觀察門體運行是否平穩，扭簧的力量是否適當，然后做具體調整并緊固各連接部分的螺絲。

　　Lift and lower the door several times by hand, observe whether the door runs smoothly, whether the force of the torsion spring is appropriate, and then make specific adjustments and tighten the screws of each connecting part.

　　六、電機的安裝

　　6、 Installation of motor

　　將鏈盒與電機連接并固定。將鏈盒前端的U形架固定到扭簧中心支架上面的木板上并居中，連接鏈盒。用帶眼角鋼做成“∏”支架，下端與電機用M8連接固定，上端用兩個M8×70㎜的膨脹螺栓固定到天棚上。用M6.4×16㎜的自攻釘將鉤座固定到頂門板頂部的中間位置上，連接鉤子。接上電源，觀察電機的運行情況，調整上下行程。

　　Connect and secure the chain box to the motor. Fix the U-shaped bracket at the front end of the chain box onto the wooden board above the torsion spring center bracket and center it, connecting the chain box. Make a "∏" bracket with corner steel, fix the lower end to the motor with M8 connection, and fix the upper end to the ceiling with two M8 × 70mm expansion bolts. Use M6.4 × 16mm self tapping screws to fix the hook seat to the middle position of the top of the top door panel and connect the hook. Connect the power supply, observe the operation of the motor, and adjust the up and down stroke.

　　七、布線

　　7、 Wiring

　　用Φ1.0線徑的白色護套線，從電機尾部的電動開關接線端子中引出，順著電機吊架布到洞口左側距地面1.2 M處，每隔500㎜釘一個線卡子，然后接上手動開關。布線要橫平豎直，既美觀又合理。

　　Use a white sheathed wire with a diameter of 1.0 to lead out from the electric switch terminal at the end of the motor, and follow the motor hanger to the left side of the hole at a distance of 1.2 meters from the ground. Nail a wire clip every 500mm, and then connect the manual switch. The wiring should be horizontal and vertical, both aesthetically pleasing and reasonable.

　　八、提手的安裝

　　8、 Installation of handle

　　提手應安裝在底門板上，左右居中，橫向中心線與方格的下端邊緣線對齊。

　　The handle should be installed on the bottom door panel, centered left and right, with the horizontal centerline aligned with the lower edge of the grid.

　　九、鎖的安裝

　　9、 Installation of locks

　　鎖眼要用專門的開孔器，開在從下往上數的第三塊門板的中心位置，安裝時鎖槽一律向下，背帽一定要擰緊。

　　The lock hole should be opened with a specialized hole opener at the center position of the third door panel counted from bottom to top. When installing, the lock groove should be facing downwards, and the back cap must be tightened.

　　車庫門安裝注意事項

　　Precautions for garage door installation

　　為了確保您的，減少事故發生，安裝之前請您務必詳盡地閱讀安裝使用手冊，并嚴格按照安裝使用手冊提示的步驟進行操作。如果您在操作中遇到疑難問題，請您咨詢安裝人員或經銷商。

　　To ensure your safety and reduce accidents, please read the installation manual carefully before installation and strictly follow the steps indicated in the manual. If you encounter any difficult problems during operation, please consult a professional installer or dealer.

　　1、安裝時務必請安裝人員對門體進行檢查，只允許在平衡良好的門體上安裝開門機，否則可能造成嚴重的后果。

　　1. During installation, it is necessary to ask the installation personnel to inspect the door body. Only allow the installation of the door opener on a well balanced door body, otherwise it may cause serious consequences.

　　2、門體正在運行時，嚴禁人或物體從門體下方通過，或在門體下方停留。

　　2. When the door is in operation, it is strictly prohibited for people or objects to pass through or stay under the door.

　　3、禁止在看不到門體運行情況的地方操作遙控器，以免造成事故或車庫門誤開。

　　3. It is prohibited to operate the remote control in places where the operation of the door cannot be seen, in order to avoid safety accidents or accidental opening of the garage door.

　　4、門體兩側水平導要求、質量標準和標準，是客戶選購自動門的選擇。

　　4. The horizontal guide requirements, quality standards, and safety standards on both sides of the door make it the best choice for customers to purchase automatic doors.

　　以上就是車庫門尺寸的相關介紹，希望對大家有所幫助。

　　The above is an introduction to the size of garage doors, hoping to be helpful to everyone.

　　本文由  濟南車庫門  友情奉獻.更多有關的知識請點擊  http://m.jsyichuang.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Garage Door For more related knowledge, please click http://m.jsyichuang.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.