卷簾門和提升門在某些場合中的用途是一樣的，基于這一點，很多人在選擇的時候通常會默認這兩種門可以混為一談并用，實際上區別還是挺大的，來看看相關內容吧。

　　Rolling door and lifting door are used the same in some occasions. Based on this, many people usually default that these two doors can be confused and used in the choice. In fact, there is a big difference.

　　使用場所區別：提升門一般用于工廠、機場等地。卷簾門一般用于商業門面、車庫、和住宅等場所。

　　Use place difference: lift door is generally used in factories, airports and other places. Rolling shutter doors are generally used in commercial facades, garages, shopping malls and residential areas.

　　卷簾門主要是以多關節活動的門片串聯在一起電動卷簾門是以多關節活動的門片串聯在一起,在固定的滑道內,以門上方卷軸為轉動上下的門。它由13個部分組成；提升門由一系列門板組成，沿軌道上升的門由上下導軌、上下導輪、主立柱、平行四邊形鉸鏈機構、鋁壓條、拉手等部件組成。

　　The rolling shutter door is mainly connected with the door pieces with multi-joint movement in series. The electric rolling shutter door is connected with the door pieces with multi-joint movement in series. In the fixed slide, the door rotates up and down with the scroll above the door as the center. It consists of 13 parts; The lifting door is composed of a series of door panels. The door rising along the track is composed of upper and lower guide rails, upper and lower guide wheels, main columns, parallelogram hinge mechanism, aluminum laminates, handles and other components.

　　提升門主要使用鋁板壓型而成，門板四周使用鋁合金邊框。整個門體在過于龐大時，會使用加強筋固定，因此門體的承受力會大大增強，不會出現受力不均的情況。

　　The lifting door is mainly made of aluminum plate pressing, and aluminum alloy frame is used around the door plate. When the whole door body is too large, it will use reinforcement to fix it, so the bearing capacity of the door body will be greatly enhanced, and there will be no uneven force.

　　卷簾門只能使用固定的安裝空間，而提升門可以跟隨安裝在天花板和墻壁上的軌道，使門體可以有效合理地利用空間。提升門采用軸承運行方式，克服了卷簾門運行時噪音大的問題。我們可以在提升門上打開小門和小窗，但是，卷簾門打開和關閉時會有一定的噪音。

　　Rolling shutter doors can only use fixed installation space, while lifting doors can follow the rails installed on the ceiling and walls, allowing the door body to use space efficiently and rationally. The lifting door adopts the bearing operation mode, which overcomes the problem of large noise during the operation of the rolling shutter door. We can open the small door and window on the lifting door, but there will be some noise when the rolling shutter door opens and closes.

　　提升門也被稱為工業提升門，它主要用在大型庫房、涂裝車間、小型機庫等場合；而卷簾門適用在門洞較大，不便安裝地面門體的場合，比如說車庫、商業門面、、醫院等場所。通常卷簾門的安裝范圍會更廣泛一些。按照開啟方向來劃分提升門可以分為垂直和轉彎兩種；卷簾門可以分為上卷和測卷兩種。

　　Lifting door is also known as industrial lifting door, it is mainly used in large warehouse, painting workshop, small hangar and other occasions; The rolling shutter door is suitable for the occasion where the door is large and it is inconvenient to install the ground door body, such as garage, commercial facade, shopping mall, hospital and other places. Usually the installation range of rolling shutter doors will be more extensive. Lifting doors can be divided into vertical and turning doors according to the opening direction; Rolling shutter doors can be divided into two kinds: winding and measuring.

　　以上就是提升門和卷簾門的區別介紹了，相信大家不會再傻傻分不清了，大家在購買的時候，可以根據自己的實際情況去選擇。當然如果您還存在不明白的地方，可以來我們網站http://m.jsyichuang.com為您解惑。

　　The above is the difference between lifting door and rolling shutter door. I believe that you will not be confused. When you buy, you can choose according to your actual situation. Of course, if you still do not understand the place, you can come to our website http://m.jsyichuang.com to solve your doubts.